# Frequency conversion: hertz, radio prefixes and RPM

> Convert cycles per second and distinguish rotation from angular speed.

- Tool: [Frequency Converter](https://toolsg.com/en/frequency-converter)
- Language: en (available: en, zh, ms, ta)
- Last verified against official sources: 2026-10-18
- Source site: ToolSG — a planning guide, not official or financial advice. Cite the agencies listed under Sources.

## Key figures at a glance

| Fact | Value | Source |
| --- | --- | --- |
| Kilohertz | 1 kHz = 1000 Hz | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes) |
| Revolutions per minute | 60 rpm = 1 Hz (one cycle per revolution) | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-5-units-outside-si) |

## Read the unit first

Select the source and target units and enter the frequency. The result and all-unit table update in your browser with six significant digits. Prefixes change scale: k, M, G and T are different multipliers, and their case matters.

## RPM and hertz

Hertz counts cycles per second. RPM counts revolutions per minute, so divide RPM by 60 when one full revolution represents one cycle. A sensor producing several pulses per revolution needs that extra information; the converter does not know the pulse count.

## Worked examples

Examples are calculated by the actual unit engine; ≈ indicates rounding.

| Input | Result |
| --- | --- |
| 100 MHz | 100000 kHz |
| 3000 rpm | 50 Hz |
| 2.4 GHz | 2400 MHz |

## What the number does not tell you

Frequency is not angular speed in radians per second: that uses 2π radians per revolution. Nor does a higher processor clock alone establish faster application performance. This tool rescales units and does not measure a signal, motor or computer. For rotational position use the [angle converter](https://toolsg.com/en/angle-converter); for elapsed periods use the [time converter](https://toolsg.com/en/time-converter).

## Frequently asked questions

**How accurate are the results?**

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

**Is anything sent to a server?**

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

**Why does the table skip some units?**

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

**Can I convert several units at once?**

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.


## Sources

- [NIST — SI Units and Prefixes](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes)
- [NIST — Time Units](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-5-units-outside-si)
