# Parts-per conversion: percent, ppm, ppb and ppt

> Rescale a ratio without changing what is being compared.

- Tool: [Parts-per Converter](https://toolsg.com/en/parts-per-converter)
- Language: en (available: en, zh, ms, ta)
- Last verified against official sources: 2026-10-18
- Source site: ToolSG — a planning guide, not official or financial advice. Cite the agencies listed under Sources.

## Key figures at a glance

| Fact | Value | Source |
| --- | --- | --- |
| Percent | 1 % = 10000 ppm | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-7-rules-and-style-conventions-expressing-values) |
| Part per billion | 1 ppb = 0.001 ppm | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-7-rules-and-style-conventions-expressing-values) |
| Part per trillion | 1 ppt = 0.000001 ppm | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-7-rules-and-style-conventions-expressing-values) |

## Keep the same kind of ratio

Choose the input and output notation, then enter the number. The converter rescales that number and displays six significant digits. It does not know whether your ratio is a mass fraction, volume fraction or amount-of-substance fraction. Keep that basis unchanged when using the result.

## What the abbreviations mean here

The tool uses ppm for parts per million (10⁻⁶), ppb for parts per billion (10⁻⁹) and ppt for parts per trillion (10⁻¹²). Percent means parts per hundred. Elsewhere ppt can mean parts per thousand, so always check the source. NIST recommends explicit ratios or powers of ten for clear scientific communication.

## Worked examples

These are rescalings of the same ratio, calculated with the live engine. They do not convert between different physical quantities.

| Input | Result |
| --- | --- |
| 0.1 % | 1000 ppm |
| 500 ppm | 0.05 % |
| 1 ppm | 1000 ppb |

## Common mistakes

One ppm is a ratio of 10⁻⁶, not a universal mg/L concentration. Converting mass per volume requires additional information such as density. A percentage-point change also differs from a relative percentage change. For ordinary percentage calculations use the [percentage calculator](https://toolsg.com/en/percentage-calculator); this tool only changes notation.

## Frequently asked questions

**How accurate are the results?**

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

**Is anything sent to a server?**

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

**Why does the table skip some units?**

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

**Can I convert several units at once?**

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.


## Sources

- [NOAA — Salinity and Parts per Thousand](https://oceanservice.noaa.gov/education/dyw-pass-salt.html)
- [NIST — Expressing Values of Quantities, Sections 7.10.2–7.10.3](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-7-rules-and-style-conventions-expressing-values)
