# Speed conversion: road speeds, knots and the limits of Mach

> Convert distance per time, with a clear distinction between speed and running pace.

- Tool: [Speed Converter](https://toolsg.com/en/speed-converter)
- Language: en (available: en, zh, ms, ta)
- Last verified against official sources: 2026-10-18
- Source site: ToolSG — a planning guide, not official or financial advice. Cite the agencies listed under Sources.

## Key figures at a glance

| Fact | Value | Source |
| --- | --- | --- |
| Miles per hour | 1 mph = 0.44704 m/s | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9) |
| Knot | 1 kn = 1.852 km/h | [NOAA](https://oceanservice.noaa.gov/facts/nautical-mile-knot.html) |

## Use the converter

Select the input and output units and enter a decimal speed. The result and equivalent-unit table update in your browser. Swap reverses the chosen pair. Results are displayed to six significant digits.

## Distance per time

Speed is distance divided by elapsed time. Converting km/h to m/s changes both units: divide by 3.6. A knot is one nautical mile per hour. Miles per hour use statute miles, so mph and knots are not interchangeable.

## Worked examples

The table is calculated with the actual engine and configured factors; ≈ marks rounding.

| Input | Result |
| --- | --- |
| 36 km/h | 10 m/s |
| 60 mph | ≈ 96.5606 km/h |
| 10 kn | 18.52 km/h |

## Mach and pace need context

Mach is a ratio to the local speed of sound, which depends on the gas and temperature. This tool uses a fixed reference of 340.29 m/s for Mach 1; it does not calculate local atmospheric conditions. For running, lower minutes per kilometre means faster motion: use the [pace converter](https://toolsg.com/en/pace-converter) for that reciprocal calculation.

## Frequently asked questions

**How accurate are the results?**

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

**Is anything sent to a server?**

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

**Why does the table skip some units?**

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

**Can I convert several units at once?**

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.


## Sources

- [NIST — Conversion Factors by Quantity](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9)
- [NOAA — Nautical Miles and Knots](https://oceanservice.noaa.gov/facts/nautical-mile-knot.html)
- [NASA — Mach Number](https://www.grc.nasa.gov/www/k-12/BGP/mach.html)
