# Temperature conversion: Celsius, Fahrenheit, kelvin and Rankine

> Use offsets for temperature readings and different arithmetic for temperature changes.

- Tool: [Temperature Converter](https://toolsg.com/en/temperature-converter)
- Language: en (available: en, zh, ms, ta)
- Last verified against official sources: 2026-10-18
- Source site: ToolSG — a planning guide, not official or financial advice. Cite the agencies listed under Sources.

## Key figures at a glance

| Fact | Value | Source |
| --- | --- | --- |
| Kelvin offset | °C = K − 273.15 | [NIST](https://www.nist.gov/pml/owm/si-units-temperature) |
| Fahrenheit scale factor | °C = (°F − 32) × 5/9 | [NIST](https://www.nist.gov/pml/owm/si-units-temperature) |
| Rankine scale factor | K = °R × 5/9 | [NIST](https://trc.nist.gov/cryogenics/aboutCryogenics.html) |

## Convert a temperature reading

Choose the source scale and destination scale, then enter the reading. Negative Celsius and Fahrenheit values can be valid. The browser calculates the result and the equivalent readings in all scales. Results use six significant digits.

## Offsets matter

For readings, °F = °C × 9/5 + 32 and K = °C + 273.15. Rankine is an absolute scale with Fahrenheit-sized intervals: °R = K × 9/5. Unlike an ordinary unit multiplier, these conversions may require both a scale factor and an offset. Kelvin uses the symbol K, without a degree sign.

## Worked examples

These are temperature readings, not temperature differences. Small floating-point errors can occur before formatting.

| Input | Result |
| --- | --- |
| 0 °C | 32 °F |
| 25 °C | 298.15 K |
| -40 °C | -40 °F |
| 0 K | 0 °R |

## Changes and physical limits

A rise of 10 °C is a rise of 10 K or 18 °F, not a reading of 50 °F. Do not enter a temperature difference into this reading converter. Absolute zero is 0 K, or −273.15 °C. The tool performs arithmetic and does not reject readings below this physical limit. It is not a thermometer calibration or a weather forecast; for local observations use the [weather monitor](https://toolsg.com/en/weather-monitor).

## Frequently asked questions

**How accurate are the results?**

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

**Is anything sent to a server?**

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

**Why does the table skip some units?**

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

**Can I convert several units at once?**

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.


## Sources

- [NIST — SI Units: Temperature](https://www.nist.gov/pml/owm/si-units-temperature)
- [NIST — Kelvin: Introduction](https://www.nist.gov/si-redefinition/kelvin-introduction)
- [NIST — About Cryogenics](https://trc.nist.gov/cryogenics/aboutCryogenics.html)
