# Torque conversion: newton-metres, pound-feet and pound-inches

> Translate a torque specification while preserving the force and length units.

- Tool: [Torque Converter](https://toolsg.com/en/torque-converter)
- Language: en (available: en, zh, ms, ta)
- Last verified against official sources: 2026-10-18
- Source site: ToolSG — a planning guide, not official or financial advice. Cite the agencies listed under Sources.

## Key figures at a glance

| Fact | Value | Source |
| --- | --- | --- |
| Pound-force foot | 1 lbf·ft ≈ 1.35582 N·m | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9) |
| Pound-force inch | 1 lbf·in ≈ 0.112985 N·m | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9) |
| Kilogram-force metre | 1 kgf·m = 9.80665 N·m | [NIST](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9) |

## Convert the stated specification

Choose the source and target torque units, then enter the number. The browser updates the result and all-unit table with six significant digits. Read the complete unit: pound-feet and pound-inches differ by the length component.

## A turning effect, not just force

Torque depends on force and its perpendicular lever arm. The pound in lbf·ft is pound-force, not pound mass. Likewise kgf·m uses kilogram-force. Torque and energy share dimensions, but a torque specification is not an energy amount and should retain torque notation.

## Worked examples

Examples use the live engine and factors; ≈ marks a rounded result.

| Input | Result |
| --- | --- |
| 100 N·m | ≈ 73.7562 lbf·ft |
| 12 lbf·in | 1 lbf·ft |
| 1 kgf·m | 9.80665 N·m |

## A converter does not select a tightening value

Keep the original specification's conditions and tolerances. This tool cannot infer a tightening torque from bolt size or account for friction, lubrication, tool calibration or preload. It only changes units. For work or energy quantities use the [energy converter](https://toolsg.com/en/energy-converter); for distances use the [length converter](https://toolsg.com/en/length-converter).

## Frequently asked questions

**How accurate are the results?**

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

**Is anything sent to a server?**

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

**Why does the table skip some units?**

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

**Can I convert several units at once?**

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.


## Sources

- [NIST — Unit Conversion Factors](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9)
- [NIST — SI Units and Prefixes](https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes)
