Length Converter – Meters, Feet, Miles & More

Free Length Conversion Tool for Metric & Imperial Units

Gm
Mm
km
m
cm
mm
μm
nm
mi
yd
ft
in
nmi

In-depth guide

Length conversions: metres, feet, inches and nautical miles

Convert everyday measurements, distinguish miles from nautical miles, and understand rounded results.

Last verified: Sources: NIST Plain-text version of this guide

Key figures at a glance

Inch
1 in = 0.0254 m
Source: NIST
Foot
1 ft = 0.3048 m
Source: NIST
Nautical mile
1 nmi = 1852 m
Source: NIST

How the converter works

Enter a decimal number in any unit field; the other fields update automatically. The page supports metric lengths from nanometres to gigametres, plus inches, feet, yards, miles and nautical miles. It converts through metres: result = input × source factor ÷ destination factor.

Worked examples

The following examples use the same factors as the calculator. Values marked ≈ are rounded.

Input Result
12 in 30.48 cm
6 ft 1.8288 m
5 km ≈ 3.10685596 mi
1 nmi 1.852 km

Mixed units and common mistakes

Convert a mixed measurement to one unit before entering it: 5 ft 6 in = 66 in = 167.64 cm. Do not enter 5.6 feet to mean 5 feet 6 inches: 5.6 ft = 170.688 cm. A mile and a nautical mile are different units. These foot conversions use the international foot; historical survey measurements may use a different definition.

The displayed result is rounded: ordinary values have up to eight decimal places, while very small or large values use scientific notation. Exact unit definitions do not improve the accuracy of your original measurement. Keep extra digits until the final calculation. For floor sizes use the area converter; length factors cannot be applied directly to square units.

Frequently Asked Questions (FAQ)

Can I convert fractions of units, like 0.5 meters to inches?

Yes! Our tool handles decimal and fractional values for all supported units. You can enter any decimal number and get accurate conversions across all metric and imperial units.

Is this converter accurate for professional use?

Absolutely. We use precise mathematical conversion ratios for all metric and imperial units. The tool is suitable for professional, educational, and personal use.

Can I use this tool offline?

Currently, the tool works online only, but it's optimized to load instantly on any device with internet connection.

Does this converter support unusual units like gigameter or nanometer?

Yes! It supports both common and advanced units (from nanometers to gigameters), making it useful for science, engineering, and education applications.

How do I convert meters to feet?

Simply enter the value in meters, and the feet field will automatically display the converted value. 1 meter equals approximately 3.28084 feet.

What's the difference between miles and nautical miles?

A nautical mile (1,852 meters) is longer than a standard mile (1,609.344 meters). Nautical miles are used in aviation and maritime navigation.

Can I convert between metric and imperial units?

Yes! This converter seamlessly converts between all metric units (meters, kilometers, etc.) and imperial units (feet, miles, inches, etc.).

Why use this length converter over a calculator?

Our converter automatically calculates all unit conversions simultaneously, saving time. It's more accurate than manual calculations and includes 13 different units in one interface.

Sources

  1. NIST — Handbook 44, Appendix C: General Tables of Units of Measurement
  2. NIST — SI Units: Length

This guide explains published rules in plain language. It is not financial, legal or official advice — rules change, so confirm with the agency linked above before you commit.

Embed this tool on your website

Free to use. Paste this code into your page and keep the link back to ToolSG.