Area Converter

Convert between Area units instantly, with every unit shown side by side.

Result

The same value in every unit

Conversion reference

One Square metre expressed in each of the other Area units.

Unit Symbol Equivalent
Square kilometre km² 0.000001
Square centimetre cm² 10000
Square millimetre mm² 1000000
Hectare ha 0.0001
Acre ac 0.000247105
Square mile mi² 3.86102E-7
Square yard yd² 1.19599
Square foot ft² 10.7639
Square inch in² 1550

In-depth guide

Area conversion for floor plans and land measurements

Convert square metres, square feet, acres and hectares while keeping area separate from length.

Last verified: Sources: NIST Plain-text version of this guide

Key figures at a glance

Square foot
1 ft² = 0.09290304 m²
Source: NIST
Acre
1 ac = 4046.8564224 m²
Source: NIST
Hectare
1 ha = 10000 m²
Source: NIST

Choose the measurement you actually have

Select the source and destination area units, then enter a decimal value. The result and the table of equivalent values update in your browser. Swap reverses the selected units. The separate reference table describes one unit of the default source, rather than your current input.

Why the length factor must be squared

Area conversion uses squared lengths: 1 ft = 0.3048 m, so 1 ft² = 0.3048 × 0.3048 m². Multiplying a floor area by the length factor alone gives the wrong result. To measure a rectangle, first put both side lengths in the same unit, then multiply them.

Worked examples

The table uses the configured conversion factors. The converter displays six significant digits; ≈ marks rounded values.

Input Result
100 m² ≈ 1076.39 ft²
1 ac ≈ 0.404686 ha
10000 cm² 1 m²

Property measurements and limits

These factors use the international foot. Check the convention before converting historical survey records. Converting units does not reconcile different definitions of usable, gross or advertised floor area. It also does not add precision to an approximate measurement. For side lengths use the length converter.

Frequently asked questions

How accurate are the results?

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

Is anything sent to a server?

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

Why does the table skip some units?

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

Can I convert several units at once?

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.

Sources

  1. NIST — Revised Unit Conversion Factors
  2. NIST — Units Outside the SI

This guide explains published rules in plain language. It is not financial, legal or official advice — rules change, so confirm with the agency linked above before you commit.

Related converters

Embed this tool on your website

Free to use. Paste this code into your page and keep the link back to ToolSG.