Illuminance Converter

Convert between Illuminance units instantly, with every unit shown side by side.

Result

The same value in every unit

Conversion reference

One Lux expressed in each of the other Illuminance units.

Unit Symbol Equivalent
Kilolux klx 0.001
Foot-candle fc 0.092903
Phot ph 0.0001
Nox nx 1000

In-depth guide

Illuminance conversion: lux, foot-candles and light on a surface

Translate incident-light measurements without treating lumens or watts as lux.

Last verified: Sources: NIST Plain-text version of this guide

Key figures at a glance

Kilolux
1 klx = 1000 lx
Source: NIST
Foot-candle
1 fc ≈ 10.7639 lx
Source: NIST
Phot
1 ph = 10000 lx
Source: NIST

Convert a surface measurement

Choose the source and destination illuminance units and enter the value. The browser calculates the result and all-unit table to six significant digits. The converter does not read a camera or light sensor; it needs a measurement supplied by you.

Lux, lumens and watts differ

Illuminance describes luminous flux arriving per area: one lux is one lumen per square metre. Lumens describe luminous flux, while watts describe power. Neither a lamp's lumen rating nor its electrical wattage alone determines lux at a desk.

Worked examples

Examples use the actual engine and configured factors; ≈ marks rounding.

Input Result
500 lx ≈ 46.4515 fc
1 klx 1000 lx
0.02 ph 200 lx

Measurement conditions matter

Distance, aiming, light distribution and the measurement plane affect a reading. Unit conversion does not estimate these effects or certify lighting adequacy. Compare measurements taken under the same conditions. For surface sizes use the area converter; for electrical power use the power converter.

Frequently asked questions

How accurate are the results?

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

Is anything sent to a server?

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

Why does the table skip some units?

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

Can I convert several units at once?

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.

Sources

  1. NIST — SI Units and Prefixes
  2. NIST — Unit Conversion Factors

This guide explains published rules in plain language. It is not financial, legal or official advice — rules change, so confirm with the agency linked above before you commit.

Related converters