Voltage Converter

Convert between Voltage units instantly, with every unit shown side by side.

Result

The same value in every unit

Conversion reference

One Volt expressed in each of the other Voltage units.

Unit Symbol Equivalent
Millivolt mV 1000
Microvolt µV 1000000
Kilovolt kV 0.001
Megavolt MV 0.000001

In-depth guide

Voltage units: volts, millivolts and kilovolts, with Singapore mains as an example

What the volt measures, when to use µV, mV, V, kV or MV, the conversion factors, worked examples with 230 V mains and 22 kV networks, and the RMS, peak and line-to-line mistakes.

Last verified: Sources: SP Group Plain-text version of this guide

Key figures at a glance

Kilovolt
1 kV = 1,000 V
Distribution and transmission networks.
Millivolt
1 mV = 0.001 V
Sensor signals, thermocouples and audio.
Megavolt
1 MV = 1,000,000 V
Seen mainly in physics and very high-voltage research.
Singapore household supply
230 V, 50 Hz, single phase
As marked on the sample household meter in SP Group's residential guide.
Source: SP Group

What voltage is

Voltage is the electrical potential difference between two points: the "push" that drives current round a circuit. The volt (V) is the SI unit; one volt drives one ampere through a resistance of one ohm and delivers one watt. All the prefixed units are powers of 1,000, so converting is a single multiplication.

Which unit to use

Unit Symbol Typical use
Microvolt µV Very small sensor and biological signals
Millivolt mV Thermocouples, audio and instrument signals
Volt V Batteries, USB (5 V), household mains
Kilovolt kV Distribution and transmission networks, X-ray equipment
Megavolt MV Particle accelerators and high-voltage research

In Singapore, the sample household meter in SP Group's residential guide is marked single-phase, 230 V, 50 Hz. That 230 V is a nominal RMS value.

The conversion

Multiply by the factor of the unit you have, then divide by the factor of the unit you want (1 mV = 0.001 V, 1 kV = 1,000 V, 1 MV = 1,000,000 V).

You have Convert to Result
230 V kV 0.23 kV
22 kV V 22,000 V
400 V kV 0.4 kV
3.3 V mV 3,300 mV
66 kV MV 0.066 MV

Voltage links to the other quantities by P = V × I. A 230 V circuit carrying 8.7 A delivers about 2,001 W, close to a 2 kW appliance. Use the current converter and power converter for those units.

RMS, peak and line-to-line

Converting units never changes which kind of voltage you mean, and that is where most errors come from.

Quantity Relationship Example
Peak of an AC sine wave RMS × √2 (about 1.414) 230 V RMS peaks near 325 V
Three-phase line-to-line line-to-neutral × √3 (about 1.732) 400 V line-to-line is about 230.9 V line-to-neutral

Common mistakes

  • Reading mV as MV (or the reverse). Case matters: m is milli (0.001) and M is mega (1,000,000), a factor of a billion apart.
  • Quoting peak when RMS is meant. A mains rating is RMS unless it says otherwise.
  • Mixing line-to-line and line-to-neutral in three-phase equipment. Check which one a nameplate gives.
  • Comparing volts with kVA or kW. A transformer rated in kVA is limited by both its voltage and its current; see the apparent power converter.
  • Assuming a "12 V" battery stays at 12 V. Nominal ratings differ from the actual terminal voltage, which varies with charge and load.

Frequently asked questions

How accurate are the results?

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

Is anything sent to a server?

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

Why does the table skip some units?

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

Can I convert several units at once?

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.

Sources

  1. BIPM — The International System of Units (SI Brochure, 9th edition) — The volt as a derived SI unit and the SI prefixes.
  2. SP Group — Residential Utilities Guide — Sample household meter marked 1P2W, 230 V, 50 Hz.

This guide explains published rules in plain language. It is not financial, legal or official advice — rules change, so confirm with the agency linked above before you commit.

Related converters