Volumetric flow rate Converter

Convert between Volumetric flow rate units instantly, with every unit shown side by side.

Result

The same value in every unit

Conversion reference

One Litre per minute expressed in each of the other Volumetric flow rate units.

Unit Symbol Equivalent
Cubic metre per second m³/s 0.0000166667
Cubic metre per hour m³/h 0.06
Litre per second L/s 0.0166667
Litre per hour L/h 60
Gallon (US) per minute GPM 0.264172
Cubic foot per minute CFM 0.0353147

In-depth guide

Volume flow: litres per minute, cubic metres per hour, GPM and CFM

Convert volume per time without confusing it with fluid speed or mass flow.

Last verified: Sources: NIST Plain-text version of this guide

Key figures at a glance

Litre per second
1 L/s = 0.001 m³/s
Source: NIST
Cubic metre per hour
1 m³/h = 1/3600 m³/s
Source: NIST
US gallon per minute
1 GPM (US) ≈ 0.0630902 L/s
Source: NIST

Choose both parts of the unit

Select the original flow unit and the desired unit, then enter the rate. The browser shows equivalent rates to six significant digits. Changing L/min to m³/h requires converting volume and time together, not just changing the volume label.

GPM means US liquid gallons here

This tool's GPM uses US liquid gallons, not imperial gallons. CFM means cubic feet per minute. A flow rate is a volume over time, not a pipe velocity. Finding velocity also requires the flow area; finding mass flow requires density.

Worked examples

Examples use the configured factors and actual engine; ≈ marks rounded results.

Input Result
10 L/min 0.6 m³/h
100 CFM ≈ 169.901 m³/h
5 GPM ≈ 18.9271 L/min

Keep the measurement conditions

Gas volume depends on conditions. Standard and actual CFM are not interchangeable by a unit factor alone; this tool does not apply pressure or temperature corrections. It also does not predict pump output or pressure loss. For a fixed quantity use the volume converter; for pressure units use the pressure converter.

Frequently asked questions

How accurate are the results?

Conversions use exact factors where an exact factor exists, and standard published values otherwise. Results are shown to six significant digits, which is more precision than almost any practical measurement warrants.

Is anything sent to a server?

No. The conversion runs entirely in your browser. Nothing you type is uploaded, logged or stored.

Why does the table skip some units?

A unit is omitted when the conversion has no finite result. In the pace converter, zero speed has no finite pace and zero pace has no finite speed.

Can I convert several units at once?

Yes. The table under the converter shows your value in every unit of this dimension simultaneously, so you can read off whichever you need.

Sources

  1. NIST — Gas Flowmeter Calibration and Reference Conditions
  2. NIST — Unit Conversion Factors
  3. NIST — Time Units

This guide explains published rules in plain language. It is not financial, legal or official advice — rules change, so confirm with the agency linked above before you commit.

Related converters